// 
Power Plant Controllers with WAGO Power Plant Control
10 Aug 2023
Power plant controllers help power plants achieve grid-compatible feed-in management at the grid connection point (GCP). WAGO Power Plant Control allows plant operators and system integrators to meet the requirements for these controllers that are set on the grid side – flexibly and reliably. The solution is certified per VDE-AR-N 4110 and 4120.
What is a power plant controller?
A power plant controller is an essential component of a power plant; more specifically, it is a component in the grid connection point (GCP) where relevant information is exchanged between the plant and the grid operator.
What does it do?
The power plant controller forms the interface between the plant and the power supplier, the grid operator the direct marketer, in order to allow the control power to be sold on the exchange, for example. In the process, it regulates the setpoint values for active and/or reactive power at the grid connection point (GCP). It compares these setpoints to the measured actual values at the GCP and communicates the calculated control variable to the generating systems. With the help of the power plant controller, the grid operator can control the plant feed-in via specified characteristics on the generator side. A good way to picture it is as the grid operator’s “accelerator and brake pedals” for power plants, since generation and consumption must be in harmony at all times.
Many grid operators also require an interface of the so-called intelligent customer station with the energy supplier. This allows actual values and errors to be monitored at all times on the customer station. The grid operator has switching power within its area of authority, so it can reestablish the power supply within seconds. The grid information this makes available helps grid managers achieve better utilization.
Why does a power plant controller need a component certificate?
The percentage of renewable energy in the power grid is increasing, and we want this increase to continue – but without endangering the stability of the grid. For this reason, the technical connection rules (TCRs) for decentralized power plants have been made tightened. A central element of this is a power plant controller, which must have a corresponding component certificate, or else it cannot be put into operation and connected to the grid. However, only companies certified per ISO 9001 can get this component certificate.
Is there one power plant controller standard for all plants?
No, each plant is different. However, a flexible concept can help plant planners and operators and system integrators save a great deal of time and effort. Therefore, a great variety of projects can be realized with the Linux®-based controllers and the modular WAGO I/O System – for instance, from the building, energy and e-mobility industries – regardless of the prevailing plant configuration. The control solution also allows battery storage systems and loads to be connected and controlled directly. And the second-generation PFC200 understands much more than just the more common protocols on the market.
What is WAGO Power Plant Control?
“WAGO Power Plant Control” is a library with a control algorithm for active and/or reactive power certified per VDE-AR-N 4110/4120. It can be used on the second-generation PFC200 Controller. This controller has two ETHERNET ports, which can be used as switches, or separately over two isolated networks. This makes it possible to communicate directly from the controller with the grid operator and direct marketer, through a VPN tunnel with secure end-to-end encryption – for example, via standard protocols like IEC 60870 -104/101 and Modbus® or ripple control receivers, etc. This allows transfer of the active power, the reactive power or the power factor cos phi, among other things. The overall system allows customers to implement tailored power plant controllers. All information, datasheets, the manual, the simulation model, certificates and a 30-day trial version are available for download as a compact file.
Email: amit.tiwari@wago.com
Website: www.wago.com
leave your comment