MECO Advanced Electrical Testing and Measurement Instruments

26 Dec 2024

MECO “SOLAR MODULE ANALYZER (Photovoltaic I-V Curve Tester)” 

The MECO Solar Module Analyzer Model – 9009 is a portable analyzer used for testing, maintenance and finding efficiency of various parameters of solar panel and cell. Analyzer can be used to design Solar System to generate specific power. It can identify Solar Power System requirement, best angle of Solar Panel installation and Broken / Worn-Out cells. Solar Module Analyzer 9009 can scan solar cells/ panels upto 60V and 12A maximum. The portability of this device means that it is also useful in quality assurance at various stages on the production line and can be taken from one site to another. When used in the installation of solar panels, solar panel analyzer assists in determining the proper inverter size as well as optimum power output position of panels and helps to identify defective cells or panels that have worn out over time. The solar panel analyzer also provides the user with current and voltage (I-V) test curves, maximum solar power (Pmax) as well as current (Ishort, Imax) and voltage (Vnow, Vopen, Vmax). Solar cell/ panel efficiency (%) is also easily determined using the unit. Solar Module Analyzer is supplied with user friendly software for Data Storing and Analysis. Users can store data (.CSV/.TAB) that can be read in MS Excel and print Waveform / Graph via printer. Other features: Max. Solar Panel Power (Pmax) search by AutoScan : 60V, 12A, Best Resolution of 1mV-1mA, Memory Size 100 Records, Large LCD backlight, Communicate with PC via USB Cable, Manual AC Adaptor & Rechargeable Lithium Battery, I-V Curve with Cursor to Display each Data Point.

MECO “ANALOG INSULATION TESTER”

MECO Analog Insulation Tester MC900 Series having High Accuracy ±5% of Indicated Value at 27°C±5°C. It has 7 Models with various Voltage & Mega Ohms Ranges. It is ideally suited for testing of Insulation Resistance and Voltage of Transformers, Switches, High Voltage Systems, Cables, Appliances, Motors etc.

Key Features

? Single Person Push Button Operations

? High Accuracy

? Terminal Voltage More than 85% of rated voltage for Insulation Resistance Measurement from 10% to 100% of the Insulation Resistance Range

? Battery Adaptor

? As per IS 10656-1983

? As per EMC Standard IEC 61010

? Over Voltage CAT II, 1000V Phase - Earth As per Safety Standard IEC/EN 61010-1 & 61010-31

Applications

? Electrical Equipment’s (Motors, Transformers, Machines, etc.)

? Cables for Communication Networks

? Industrial, Commercial & Residential Networks

? Electrical Cables for Distribution Networks House Hold Appliances (Washing Machines, Mixers, Toasters).

MECO CLAMP-ON TRMS POWER METER

MECO Clamp-On TRMS Power Meter (Model : 3510PHW-AUTO) is State of the Art Versatile Instrument using Micro Controller Technology and having various functions that would be Ideal for an Inspector / Service Engineer to carry out Vigilance Checks, Surveys, Audits and Periodic Visits for checking at Industrial and Consumers end. To check current drawn in Transformers, Motors and Compressors with MAX/MIN/REC in temperature mode to assess efficiency, Test Run/Start Capacitors, Analyze Temperature Data with the Aid of the Time Stamp, Check for Energized Circuits, Capture Motor in Rush Current readings, determine peak Power Demand periods and Electrical Audit of Heating, Ventilation & Aircon Systems are main application for this meter.

Features :

• Check 3P Phase Sequence

• 4 Digit LCD, 9999 Counts, Autoranging

• Data HOLD and Auto Power Off

• Dual Display KW+HP, KW+PF, KW+KVAR, KVA+Ph. Angle, V+A, A+Hz and V+Hz

• Cable of Diameter upto 43mm / Busbar upto 65mm x 16mm

The measurements can be done without disconnecting the loads and in a very short interval of time. Procedure for measurement is Clamping on Busbar, taking Voltage from the same phase it will display (Dual) Parameters including Horse Power (800HP), Power Factor, Phase Angel, TRMS Current (1000A), AC/DC Voltage (600V), TRUE Power (600KW), Apparent Power (600KVA), Reactive Power (600KVAR) Resistance (999.9K? & 99.99M?), Diode, Capacitance, Temperature & Frequency.

MECO Clamp - On Earth / Ground Resistance & Leakage Current Tester

The faults in any Electrical System are unavoidable. Earthing plays an important role in generation, Transmission & Distribution for safe and proper operation of any electrical Installation. MECO 4680BLC has long elliptical jaw suitable for flat as well as round earthing strips. It completely eliminates the use of ground and auxiliary roads thus saving lot of time and avoiding shutdown. Calibration check can be verified by using the resistance verification plate provided. This is an extremely handy instrument especially at place where it is next to impossible to measure Earth / Ground Resistance by conventional methods. Substantial time saving and easy operating justify the investment in these instruments. Having Jaw opening of 65mm x 32mm, which is suitable to take measurement from Earthing Strip or Conductor of Φ 65mm x 32mm approx. These testers are capable of measuring Ground Resistance from 0.010 Ohms to 1000 Ohms and Leakage Currents in TRMS mode from range 80mA to 30A AC. Data hold, Data Storing Memory, Configurable Alarm, Auto power off & Continuity Loop Test are Key features of 4680BLC. Standard Resistance Calibration Plate provided to verify the calibration check of tester. Substantial time saving and easy operating justify the investment in these instruments. This is non-contact type innovative solution for measuring Ground Resistance and Leakage Current of any Electrical Installation. This method of measurement completely eliminates the use of ground and auxiliary rods avoiding shutdown. This is an extremely handy instrument especially at place where it is next to impossible to measure Earth / Ground Resistance by conventional methods.